Why manage runoff? | What is a Swale? |
Why are Swales important? | How can you reduce polluted runoff?
WHY MANAGE RUNOFF?
When land is converted from its natural state to other uses, especially urban land uses such as roads, homes, and shopping centers, many impervious or paved surfaces are created. Rainfall can no longer soak into the ground. Instead it becomes stormwater or runoff.
As land is developed the volume, speed of flow, and pollutant loading of runoff increases. To minimize downstream flooding and protect lives and property, and to reduce pollution of water bodies, stormwater management practices are used to retain, detain, and/or filter the runoff.
WHAT IS A SWALE?
Swales are one of the most commonly used stormwater practices. For many years they have been used along rural highways and residential streets to convey runoff. Today, swales not only convey stormwater but also help to treat runoff to reduce pollutants.
Like ditches, swales collect stormwater from roads, driveways, parking lots and other hard surfaces.
Unlike ditches, swales are not deep with straight sides. They have gently sloping sides and are wider than they are deep.
Swale with a swale block
Trash in swale
Swale and berm system
They are vegetated to prevent the slopes from eroding and to help filter pollutants during and after rainstorms.
Top of Page
WHY ARE SWALES IMPORTANT?
Because swales are wider than they are deep (usually a 6:1 ratio), the rainwater is spread over a broader area. This slows the water and allows the runoff to temporarily pond.
Reducing the water's speed allows the vegetation to filter the rainwater and remove sediments, heavy metals and hydrocarbons such as oil and grease.
Ponding of runoff in the swale allows the water to soak into the soil, helping to reduce the volume and amount of pollutants.
The gradual sloping sides of the swale make them easier to maintain and vegetate. This decreases erosion that causes sedimentation of streams, lakes and wetlands.
You benefit from properly designed, constructed, and maintained swales. Stormwater runoff ponded in a swale impacts you a lot less than stormwater ponded on your sidewalk, in your street or on your parking lot.
Top of Page
HOW CAN YOU REDUCE POLLUTED RUNOFF?
1. MAINTAIN YOUR SWALE
· Mow the swale.
· Remove and then compost leaves and grass clippings.
· Keep good grass growth.
· Minimize use of fertilizers, pesticides, and herbicides.
· Aerate soils to restore percolation rate
2. DO NOT MISUSE YOUR SWALE
· Do not pile garbage, trash, leaves, limbs or garden debris in swales - this adds pollutants and creates an unsightly mess.
· Do not pave the swale - this reduces percolation of runoff.
· Do not park vehicles in the swale - this compacts the soil so less runoff soaks in.
3. LET THE WATER POND
· Runoff should temporarily pond in the swale for 24 to 36 hours.
· Don't increase driveway culvert sizes.
· Don't lower driveway culverts.
4. ADD SWALES TO YOUR YARD
· Waterfront property owners should build a swale and berm system to intercept runoff and pollutants from their yard.
· Swales can be used between lots and at the rear of lots to intercept and retain runoff.
· Swales can be used on residential and commercial land uses to collect roof runoff.
5. TALK TO ELECTED OFFICIALS
· Help "Save the Swales". Local regulations require the use of swales, underground disposal through exfiltration pipes,
or dry retention ponds for new construction. Reclamation of swales in older neighborhoods makes good sense.
· Don't complain when water ponds in the swale for 24 to 36 hours -
mosquitoes won't breed until water ponds for 72 hours or longer.
· Let local officials know if water ponds so long that swale vegetation begins to die.
IF YOU WANT MORE INFORMATION ABOUT SWALES AND STORMWATER TREATMENT, CONTACT:
FLORIDA DEPARTMENT OF ENVIRONMENTAL PROTECTION
Stormwater/Nonpoint Source Management Section
2600 Blairstone Road, Tallahassee, FL 32399
Phone: 904-488-0782
Top of Page
|
